... ... ...
...
ACDCshop logo
Set of tools for repairing soldered connections
GreekSeperatorEnglishSeperator
Νέα προϊόντα Πλοηγός Εταιρία Λογαριασμός Καλάθι Επικοινωνία
Αναζήτηση:    
  Κατάλογος » Εργαλεία » Διάφορα : The set contains crimp tool, five interchangeable jaws, 220mm  [Είσοδος
Background
...
  arrow Kατηγοριες  
     
  arrow Δημοφιλή  
Εργαλεία - Set of tools for repairing soldered connections
Εργαλεία - Set of tools for repairing soldered connections
Τελική: 12.11 €
     
  arrow Νεο Περισσότερα  
Εξαρτήματα Καλωδίων - Butt splice, in heat-shrinkable insulation, brass, 0.75÷1.25mm2
Εξαρτήματα Καλωδίων - Butt splice, in heat-shrinkable insulation, brass, 0.75÷1.25mm2
Τελική: 0.48 €
     
  arrow Πληρωμες  
Visa Mastercard 
Verified visa Secure Code 
Paypal 
     
  arrow Πληροφορίες  
  Η εταιρία
  Τρόποι πληρωμής
  Τρόποι αποστολής
  Τρόποι αγοράς
  Συχνές ερωτήσεις
  Δήλωση απορρήτου
  Όροι Χρήσης
  Επικοινωνία
     
Seperator
Seperator

Πρέσα για connector - The set contains crimp tool, five interchangeable jaws, 220mm

Κωδικός: 28720

NB-CRIMP-SET05

Τιμή χωρίς ΦΠΑ:  56.07 €
Αξία ΦΠΑ:  13.46 €
Τελική με ΦΠΑ:  69.53 €
Ποσότητα:   
* Αποστολή σε 2-5 εργάσιμες ημέρες.
Specifications
Manufacturer NEWBRAND
Tools set type for crimping push-on connectors, terminal crimping and HF connector
Package type blister
Weight 835g
Crimp tool length 220mm
 
Tools set contains:
  • crimp tool
  • five interchangeable jaws
Crimp tool application:
  • crimping insulated connectors on wires with section from 0.5 to 6,0 mm² (10 to 20 AWG)
  • crimping non-insulated connectors on wires with section from 0.5-1 mm2(AWG20-18); 1.5-2.5 mm2(AWG16-14); 4-6mm²(AWG12-10)
  • for crimping insulated terminals on conductors of 0,5 - 6 mm² (AWG20-10) of cross section
  • for crimping non-insulated terminals on wires of 1.5; 2.5; 6; 10 mm² cross section
  • crimping insulated and non-insulated cable ferrules on cables with section 0.5; 0.75; 1.0; 1.5; 2.5; 4.0 mm²
  • HF connectors of BNC and TNC types on the wires RG: 58, 59, 62, 6
Crimp tool features:
  • ergonomic bicomponent pads on handles
  • blackened tool
  • tool is made of steel
  • the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
  • jaws can be easily changed
Διαθεσιμότητα: Με παραγγελία
Seperator Πίσω Κριτικές Seperator
Κατασκευαστές--- | AVIT | BAHCO | CARL KAMMERLING | DONAU | ENGINEER | GOLDTOOL | IDEAL-TEK | KNIPEX | KOLVER | MOLEX | NEWBRAND | PIERGIACOMI | PROLINE | STABILA | WELLER | WIHA | WOLFCRAFT
left left Πελάτες που αγόρασαν αυτό το προϊόν επίσης αγόρασαν right
Ακροδεκτης - Butt splice 1.5÷2.5mm2 crimped  on cable tinned blue copper
Ακροδεκτης - Butt splice 1.5÷2.5mm2 crimped on cable tinned blue copper

Κολλητηρι αεριου - Soldering iron  gas, 1300°C, Tip temp 450°C
Κολλητηρι αεριου - Soldering iron gas, 1300°C, Tip temp 450°C

Ακροδεκτης - Butt splice, 0.5÷1.5mm2, crimped, for cable, tinned, red, copper
Ακροδεκτης - Butt splice, 0.5÷1.5mm2, crimped, for cable, tinned, red, copper

Εξαρτήματα Καλωδίων - Butt splice, in heat-shrinkable insulation, brass, 0.75÷1.25mm2
Εξαρτήματα Καλωδίων - Butt splice, in heat-shrinkable insulation, brass, 0.75÷1.25mm2

Θερμοσυστελλόμενo - Set of heat shrink sleeves, 2 1, polyolefine, Pcs 505
Θερμοσυστελλόμενo - Set of heat shrink sleeves, 2 1, polyolefine, Pcs 505

Μικρόφωνα - Microphone, Body dim  Ø6x3.5mm, 2.2kΩ, 0.5mA, 1÷10V, 50÷16000Hz
Μικρόφωνα - Microphone, Body dim Ø6x3.5mm, 2.2kΩ, 0.5mA, 1÷10V, 50÷16000Hz

Ακροδεκτης - Terminal flat 6.3mm 0.8mm male 1.5÷2.5mm2 crimped  on cable
Ακροδεκτης - Terminal flat 6.3mm 0.8mm male 1.5÷2.5mm2 crimped on cable

Αντίσταση βαττική - Resistor  wire-wound, cement, THT, 15Ω, 20W, ±5%, 14.5x13.5x60mm
Αντίσταση βαττική - Resistor wire-wound, cement, THT, 15Ω, 20W, ±5%, 14.5x13.5x60mm

left left Δείτε ακόμα right
KOLV-TECBA1 - Balancer 0.4-1kg
KOLV-TECBA1 - Balancer 0.4-1kg

D-PZ12 - Integrated circuits extractor 102mm
D-PZ12 - Integrated circuits extractor 102mm

PLCC-EXTRACTOR - Extractor for PLCC circuits
PLCC-EXTRACTOR - Extractor for PLCC circuits

KNP.1511120 - Tweezers Wire dia 0.6mm for removing varnish from wires
KNP.1511120 - Tweezers Wire dia 0.6mm for removing varnish from wires

D-HSS09 - Drill bit, Ø 0.9mm, Application metal, plastic, hardened
D-HSS09 - Drill bit, Ø 0.9mm, Application metal, plastic, hardened

KNP.001956 - Set  pliers, Pcs 4, internal circlip, Package  case
KNP.001956 - Set pliers, Pcs 4, internal circlip, Package case

KNP.4104180 - Pliers, 180mm
KNP.4104180 - Pliers, 180mm

KNP.4234280 - Pliers, welding grip, 280mm
KNP.4234280 - Pliers, welding grip, 280mm

HT-2094C - Tool  for RJ plug crimping
HT-2094C - Tool for RJ plug crimping

HT-468 - Tool  for RJ plug crimping
HT-468 - Tool for RJ plug crimping

GT-230 - Machine vice, 1175g, Jaws width 100mm, Jaws opening max 97mm
GT-230 - Machine vice, 1175g, Jaws width 100mm, Jaws opening max 97mm

FUT.PAD-12 - Tool  for crimping, non-insulated terminals, terminals, 28÷14AWG
FUT.PAD-12 - Tool for crimping, non-insulated terminals, terminals, 28÷14AWG

WERA.MS12SB1 - Set  screwdrivers, Pcs 12, Package  case
WERA.MS12SB1 - Set screwdrivers, Pcs 12, Package case

MRT-156F - Tool  for crimping, connectors, CE156, Application  CE156
MRT-156F - Tool for crimping, connectors, CE156, Application CE156

CK-39072-180 - Pliers, insulated, universal, for voltage works, 180mm
CK-39072-180 - Pliers, insulated, universal, for voltage works, 180mm

Seperator
Εκτέλεση: 0.248 s
Background
Rounded corner: bottom-left Background Rounded corner: bottom-right